• 15.5 Gallon Beer Keg Moonshine Still with 2" Copper Whiskey Column

    This item is out of stock

    This 15.5 Gallon Stainless Steel Keg Moonshine Still has a copper whiskey column with a built in Copper liebig condenser and a 3" commercial thermometer. The column is 2" in diameter x 14" tall. The liebig condenser has a 1/2" inner pipe and a 3/4" outer pipe. The length of the condenser is 24". The cooling water connections are 5/8" OD so a 5/8" garden hose will fit them perfectly. The condenser is connected to the column by 1/2" copper union. There is also a 2" tri clamp and gasket for attaching the column to your still. The moonshine still boiler and column are polished to a medium luster. You can disconnect the column in seconds in seconds with no mess. All of our Copper heads and columns are Tig welded using food grade DHP Copper welding rod. This means that the welds are as strong or stronger than the surrounding metal. This DHP copper rod melts at around 1,700°F while the Solder that our competitors use melts around 400°F. Solder joints are not nearly as strong as our welds, plus solder is messy, runs and gets all over the metal while our welds are tight, clean and pretty This still is rock solid and will last a lifetime. This Still also comes with a book, "Moonshine" by Matthew B Rowley. Chapter's include: "Equipment; Ingredients; The Process; Fundamentals of Distilling; Operating a Pot Still; Whiskeys; Grain-Based Recipes; Rums and Washes; Sugar Based Recipes; Now That You've Made It; Moonshine-Based Recipes."

    Additional Options:

    1" 304 Stainless sanitary drain valve including tri clamp port, clamp and gasket. = $72.00

    1/2" 304 stainless ball valve including 1/2" female NPT port and 1/2" stainless nipple = $42.00

    3" copper column upgrade = $100.00. This column looks just like the 2" column only bigger.

    1-1/2" Electric heater element tri clamp port installed with tri clamp and gasket. = $35.00

    1-1/2" Tri clamp to 1" NPT adapter heating element conversion plate (fits standard water heater elements) = $21.00

    4" tri clamp man way adapter in the top of the keg for access to the inside of the boiler for cleaning. = $79.00

    6" tri clamp man way adapter in the top of the keg for access to the inside of the boiler for cleaning. = $109.00

    This still has been pressure tested and is guaranteed to have no leaks.

    **All beer kegs are used, so there may be some dents or dings


    These products may not be legal to operate in some areas. Affordable Distillery Equipment, LLC strongly discourages any unlawful use of these products and is not responsible for any damage or injury caused by the misuse or unlawful use of these products. Any person or entity that uses information or equipment provided by Affordable Distillery Equipment, LLC does so entirely at their own risk and accepts all liability concerning the use of the aforementioned equipment and information.