
26 Gal Moonshine with 4" Borosilicate Glass 4 Plate Column Everything Included
This Still has a beautiful 4" Diameter Borosilicate Glass 4 Plate Column with
Gatling Gun (Tube & Shell) Dephlegmator on top of the Column and a 2"
Gatling Gun (Tube & Shell) Condenser on the right side of the column. The
column can be ran in Pot Still Mode to make Whiskey and Moonshine or it can be
ran in reflux mode to make high proof Vodka or E-85 Ethanol.
The boiler has a (2) 2" Element Port, with tri clamp and cover plate. You can
also fire this still with a Propane Burner if you like. The bottom of the
boiler is flat and recessed.
This still comes with:
* 1" drain valve
* 26 gallon capacity
* Boiler is 28" tall and has a base diameter of 19 3/4"
* Carrying handles
* 2" Filler port with tri clamp cap
* 4" column connection
* Top quality construction with beautifully rounded curves
* Built from heavy gauge 304 food grade stainless steel
* The boiler is polished to a mirror finish inside and out
* Thermo port and commercial grade thermometer with a 3" face
* This is a glass bubble plate column so no copper packing is needed
* 1 removeable Gatling Gun (tube & shell) dephlegmator (pre-condensor) on top of column
* 1 removable 2" diameter Gatling Gun (tube & shell) primary condensor
* 4 bubble plates in the column
* This column modular construction allows you to remove the bubble plate
* 1 removbeable stainless parrot with drain valve for first shots
* (2) heating element ports
* Internals of glass bubble plate column are copper
* Complete 360 viewing
Push to Connect Cooling Kit with flow control for our 4" Copper Bubble Plate
Columns. Use the clear hose for your cold water line,and red/orange for your
hot water line. These cooling kits will work for hose barb connections that
are 5/8" ID.
Parts list:
* 16 feet of 1/2" tubing (8 feet of clear tubing, and 8 feet of red/orange)
* (2) 1/2" Push to Connect Flow Tees
* (1) 1/2" Push to Connect Union Tees
* (1) 1/2" Push to Connect Union Y
* (4) 1/2" Push to Connect 90 with Male NPT Pipe Fitting
* (2) 1/2" Male Straight Pipe Fittings+
Tubing maybe different colored then shown.
This controller works great for 20 to 35 gallon stills and still boilers.
(must have 2 element ports). You will need to attach your own 60 amp 220 VAC
dryer or welding plug to the main power cord so that you can plug in the
controller. Your outlet must have a 60 amp or larger breaker. If you are going
to use this heating element controller with your own boiler, your boiler will
need (2) 2" tri clamp ferrules, (2) 2" tri clamps and gaskets. This controller
draws 50 amps @ 11,000 watts 220 VAC Single Phase.
Copper removes the nasty tasting sulfides from the alcohol vapor. This still
gives you the best of both worlds. It gives you the strength and durability of
the stainless and the taste improving qualities of a copper column. All of the
equipment that you need to distill alcohol is included, except some tubing
that you can buy at your local hardware store.
The 22 gauge copper stills that you see elsewhere on the internet are so thin
that you can take your hands and crush them like a huge beer can. If you flip
a 16 oz 24 gauge copper still with your thumb and forefinger it will make a
dent. If you punch this stainless milk can boiler with you fist, you might
break your fist but there won't be a dent.
This item comes with a 1 year warranty which covers manfacturing defects and
leaks.
Built to last a lifetime!
Hand it down to future generations!
Disclaimer: These products may not be legal to operate in some areas.
Affordable Distillery Equipment, LLC strongly discourages any unlawful use of
these products and is not responsible for any damage or injury caused bu the
misuse or unlawful use of these products. Any person or entity that uses
information or equipment provided by Affordable Distillery Equipment, LLC does
so at their own risk and accepts all liability concerning the use of the
aforementioned equipment and information.