26 Gal. Moonshine, Copper & Stainless 4 Bubble Plate Still, Turn Key

$3,327.30
Unit price per

This Still has a beautiful 4" Diameter Copper and Stainless Bubble Plate Column with four 3" diameter sight glasses, Gatling Gun (Tube & Shell) Dephlagmator on top of the Column and a 2" Gatling Gun (Tube & Shell) Condenser on the right side of the column. The column can be ran in Pot Still Mode to make Whiskey and Moonshine or it can be ran in reflux mode to make high proof Vodka or E-85 Ethanol. The boiler has a (2) 2" element port, with Tri Clamp and Cover Plate. The port can be used to install two electric element with controller. You can also fire this still with a Propane Burner if you like.

This still also comes with:

1" drain valve
26 gallon capacity
Boiler is 28" tall
Column is 41" tall
Carrying handles
2" filler port with tri clamp cap
4" column connection
Top quality construction with beautifully rounded curves
Built from heavy guage 304 food grade stainless steel & heavy gauge copper
The boiler is polished to a mirror finish inside and out
Thermo port and commercial grade thermometer with a 3" face
This is a bubble plate column so no copper packing is needed
1 removable gatling gun (tube & shell) dephlegmator (pre-condenser) on top of the column
1 removable 2" diameter gatling gun (tube & shell) primary condenser
4 bubble plates in the column
4 removable 3" sight glasses
This column's modular construction allows you to remove plates or column sections for different flavor profiles
1 removable stainless parrot with drain valve for first shots
(2) 2" heating element ports

Copper removes the nasty tasting sulfides from the alcohol vapor.

This still gives you the best of both worlds. It gives you the strength and durability of the stainless boiler and the taste improving qualities of the all copper column. All of the equipment that you need to distill alcohol is included, except some tubing that you can buy at your local hardware store.

The 22 gauge copper stills that you see elsewhere on the internet are so thin that you can take your hands and crush them like a huge beer can. If you flip a 16 oz. 24 gauge copper still with your thumb and fore finger it will make a dent. If you punch this stainless milk can boiler with your fist, you might break your fist but there won't be a dent.

Push to Connect Cooling Kit with flow control for our 4"Copper Reflux Moonshine Stills and Columns

This is a cooling kit for our 4" Copper Plate Columns. The moonshine still boiler and moonshine still column is not included. Use the clear hose for your cold water line, and the red/orange hose for your hot water line. These cooling kits will work for hose barb connections that are 5/8" ID

Parts List:

16 feet of 1/2" Tubing (8 feet of clear tubing , and 8 feet of red/orange tubing)
(2) 1/2" Push to Connect Flow Tees
(1) 1/2" Push to Connect Union Tees
(1) 1/2" Push to Connect Union Y
(4) 1/2" Push to Connect 90° with Male NPT Pipe Fittings
(2) 1/2" Male Straight Pipe Fittings

This Controller works great for 20 to 35 gallon stills and still boilers as well as our beer keg stills up to 15.5 gallons (must have 2 element ports). You will need to attach your own 60 amp 220 VAC dryer or welding plug to the main power cord so that you can plug the controller in. If you are going to use this heating element controller with your own boiler your boiler will need two 2" tri clamp ferrules, two 2" tri clamps and two 2" tri clamp gaskets. This controller draws 50 amps @ 11,000 watts 220 VAC Single Phase.

This controller includes:

(2) Ultra Low Watt Density Heating Element

(1) Variable Temperature Control

(2) 30 Amp Twist Lock Male Plugs

(2) 30 Amp Twist Lock Female Plugs

(2) 30 Amp Double Pole Switches

(1) 40 Amp SSRs

(2) 30 Amp 2 Pole Breakers

(1) 30 Amp Panel Meter

(2) 12' cords from the Controller to the Element Boxes

(1) Lidded enclosure

(2) Green Power On Lights