1lb of Copper Packing

One pound of copper mesh rolls for the packing of distilling columns.

Mesh is 5" in width

The copper will come wound tightly in a roll. Backwind the copper to a medium
tight roll to the diameter of a 1/4 to 1/2 inch larger then the diameter of
the tower so it fits snug into the tower. Insert 2 or 3 rolls of copper from
the bottom of the tower then poor rings in from the top of the tower up to
about 1" below where the condenser arm comes into the tower. The copper mesh
will keep the rings from falling into the boiler.
Suggested use;
1 pound of copper will pack a 3" column once and a 2" column twice.
We suggest to clean the copper with Citric Acid, rinse with water, and let air
dry after each run. Replace copper packing every 6-8 runs.